Quote:
Originally Posted by chuckmerja
We just ran into a similar problem...we were going to practice a bit with our "junkyard" bot - altho it has legit cRio, digital sidecar, power distribution, we use Victors instead of Jags, and of course some spikes.
Anyway, the code will deploy, and we can ping all the way to the cRio, moreover, the drivers station reports green lights for communications, robot code, etc, but we get nothing - I mean nothing, when we try to drive. Not one button or joystick axis will respond. Ironically, we get video from the camera, again indicating communications are good. We have reimaged, redeployed several times, but nothing. It is almost like the digital sidecar is not working or we have ALLL the wires wrong, since nothing will work. This has befuddled us for two nights, and is getting a bit frustrating. Help would be appreciated! Thanks, Chuck.
|
First the obvious potential error - is the DIO module in slot 4?
Are you getting any errors in the message window in the Diagnostic Tab?
Do the LEDs on the Victors change from blinking to solid when you enable?
If you are using LV, when you probe the joystick functions, are you getting correct readings?