|
Re: Our Crio Won't Run deployed Code and there are no Error messages
You may also want to check your code and see if the number that you've set for the jaguars/victors to connect into the sidecar are connected properly.
If you have stated that the drives should be connected to port 1 in the code, then connect it into port 1 of the PWM side of the sidecar. I made a mistake like this once.
Hope it helps.
__________________
int main()
{
::::::::: include=>commitment;
::::::::: int=>school name=>Asheboro::High
::::::::: int=>team name=>Kamikaze::Komets;
::::::::: Priority_Queue=>FRC Championship::2012;
::::::::: Max_Element=>Teamwork;
}
|