Quote:
Originally Posted by Kevin Sevcik
I know of a specific issue regarding bumpers single piece bumpers with mitered/butted plywood corners that bit a few teams coming out of Alamo. I think this was primarily due to a lack of clarity from the GDC on that specific issue, which allowed for differing interpretations at different regionals. I hold myself partially to blame for this specific one, as I pointedly asked the GDC about such corners and didn't press them for a crystal clear answer on it.
|
We were the team with this issue. There are always discrepancies between inspectors. I have doubts that we will make it through North Carolina without raising one red flag despite having passed two inspections, but that's the way things go.
In fact, I can't remember going through an inspection once without having the inspector point something out to fix before we got our sticker.