|
Re: Check joysticks and I/O module before each match
We've also had some minor joystick issues, mainly with people yanking on the cables / wrapping the cable around the controller way too tightly. Now one of them reads 0.5 at the idle position. We had to swap the driver/operator controllers, since it was happening on the driver side and the operator controls don't use the joystick.
__________________
Team 973 (2016-???)
Team 5499 (2015-2016)
Team 254 (2014-2015)
Team 1538 (2011-2014) 2014 Driver (25W 17L 1T)
日本語でOK
|