|
Re: Al's Annual Inspection Thread
Ok,
Before I get into my final list, there is a problem that is popping up this weekend. Minibot batteries may not be modified. You cannot cut the shrink wrap, separate the cells or otherwise modify any part of the Tetrix battery.
From the Q&A...
Minibot battery modification
Posted by 2011FRC3238 at 01/25/2011 07:25:54 pm
Is it permitted to separate the cells of the minibot battery (keeping the electrical configuration
intact)?
Re: Minibot battery modification
Posted by GDC at 01/31/2011 03:39:37 pm
This would be a violation of R92-C.
C. no more than one 12V rechargeable NiMH battery pack identical to those supplied in the FTC kit of parts (PN W739057) except the 20A fuse may be replaced with an equivalent type of lower amperage
Those teams that plan on using the withholding allowance to bring in bumpers...The bumpers are still included in the 30 pound limit.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
|