Thread: Victor troubles
View Single Post
  #13   Spotlight this post!  
Unread 03-04-2011, 17:40
theprgramerdude theprgramerdude is offline
WPI Freshman
AKA: Alex
FRC #2503 (Warrior Robotics)
Team Role: Mentor
  
Join Date: Feb 2010
Rookie Year: 2008
Location: Brainerd, Minnesota
Posts: 347
theprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud oftheprgramerdude has much to be proud of
Re: Victor troubles
Well, say the Victor interprets 255 as full forward, and 127 as full reverse. In this case, 0 could be perceived as a neutral, or whats really happening, as just a bad command that shuts the Victor off. Likely, the calibration was done poorly OR the output from the Crio got screwed up with bad code, and is sending only good signals between 0 and -1 on the joystick; from 0 to 1, the signal is whack.
__________________
Attending: MN Duluth Regional