|
Re: High torque that can be purchased.
we used an RS-775 motor through a 256:1 gearbox, with a 1.5" sprocket on the drive end, run to a 48 tooth ANSI 35 sprocket am-0055/am-0224 (6" nominal) with another 6" floating in the chain holding it tight; and we still had to put surgical tubing on the back. our robot
__________________
2012 Record (13-2-0)
lake superior regional finalists- thank you WAVE (2826) and Blue Twilight (2220)
Last edited by joek : 06-04-2011 at 18:22.
|