Quote:
Originally Posted by Mk.32
Recently I tried that however was unable to get it to work with the IP, 10.36.47.2 (our team number) however using Port 1 with the same IP works fine. And Suggestions on what ip? or is there some router config we need to do?
|
You need to have the ftp client on the same subnet. Port 2 is on subnet 192.200.0.0 I think. Access the console on the robot and type 'ifconfig' or 'ifShow'. That will tell you the IP address of the robot on both port 1 and 2. So if the robot is 192.200.0.1, use 192.200.0.100 or the computer running the ftp client program.
HTH