|
Re: Deploying Code Shortcut
Quote:
Originally Posted by wireties
Get a copy of the GettingStartedWithC.pdf file from the WPI web site. It explains how to setup a debugging session with the robot. With the debugging session working, right click on the target server (in the remote systems dialog), choose "Target Tools' then 'Target Console'.
Plus I think you can telnet directly to the robot (debugging session or not) if you checked the 'Enable NetConsole' check box from the cRIO Imaging Tool applet. (not 100% sure about this, no robot to check it out on). You can telnet from any Windows command line, just issue the command 'telnet 10.12.96.2' (for our robot).
HTH
|
Just something to note: Windows 7 has telnet functionality disabled by default. To enable it, go into Control Panel, click the category "Programs", and click "Turn Windows Features on or off". A smaller window should open up with a series of options. Search down the list for "Telnet Client" and check the checkbox to the left of it then click "ok".
__________________
Student:
<04: FRC0213> <05-08: FRC1373>
Mentor:
<09-10: FRC0809> <11-12: FRC3555> <12-14: FRC0073> <15-??: FRC3181>
Volunteer:
<FTAA> <CSA> <Defense Coordinator> <Scorekeeper> <Robot Inspector> <Official Scorer>
2016 Tour:
CTWAT [DefCoord] > Pittsburgh[Mentor/DefCoord] > TVR[FTAA] > FLR[CSA] > NE DCMP[CSA] > CMP[CSA]
|