Quote:
Originally Posted by JesseK
Since they're Gen1/Gen2 AM Shifters, there isn't an 'output shaft' available for direct drive. To direct drive the wheels, they'd either need to add one into their shifter or purchase the super shifters. Option 1 should be doable if they intend to attempt WCD, but Option 2 may be limiting.
|
you would be able to make it direct drive by removing the double sprocket in the transmission and extending that shaft, or removing the on side plate and using the stock shaft. Insert the shaft (which ever chosen) into a Andymark Hub that is bolted onto the wheel fasten as you would with a macanum wheel.
This is how our team has done Direct drive, it has worked for many many years.
May I ask how you made everything so shiny.. for some reason i can't find it out.
I am also designing chassis's in solidworks, but mine never have the nice colour yours are like.
Good luck !