http://www.chiefdelphi.com/forums/at...d=13065256 09
Who to wire IEC Limit Rotary Switch PN: AAP2T51Z11
with the motor TITREX
I foind that
A 4-wire sensor is designed for use of at least three of the four wires. Wire usage is based on connecting the sensors power (+), common (-), and either a Normally Open (N.O.) or Normally Closed (N.C.)output, or both outputs. The sensor will not operate as a 2-wire device.
My Q is whitch nomber should be the (-) of the M- witch nomber is M+