|
Re: Reprogram Dlink after competition for practice
There aren't any code changes as far as the cRIO is concerned.
It just connects via the Ethernet cable directly to the DLink.
It's easiest to just let the Driver Station set the wireless IP address (it gets set to 10.2.1.9) through the Setup tab's Choose NIC... selection.
The default gateway is generally left blank in our case, since we aren't running a gateway.
One of the problems someone else just had was getting the Driver Station application to use the wireless rather than the Ethernet port, so you may have to fiddle with it a bit. It may require turning off the Ethernet port until it finds and recognizes the wireless port.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
|