Thread: Urethane vs. Neoprene Belts
View Single Post
  #5   Spotlight this post!  
Unread 16-06-2011, 15:28
gingersalad gingersalad is offline
Liani Lye
FRC #0687 (Nerd Herd)
Team Role: Mechanical
  
Join Date: May 2011
Rookie Year: 2011
Location: California
Posts: 3
gingersalad is an unknown quantity at this point
Re: Urethane vs. Neoprene Belts
I read a post regarding types of belts in drives, and I was considering using 3/8" 0.2 pitch for both steering and driving the modules.

Types of belts thread: http://www.chiefdelphi.com/forums/sh...ght=belt+pitch

Hmm, for part numbers... how about comparing 1679K19 (urethane) and 6484K219 (neoprene)? They're both 3/8" 0.2 pitch, single sided with trapezoidal teeth, and have an outer circle of 9".