|
Re: Crio Not Taking Code (Different Problem)
It's possible your code is bombing out right away - use NetConsole to see if that is happening.
You'll find NetConsole in your Windows Programs menu. It was installed with the other FRC Utilities.
From the C++ Getting Started GuideNote: Netconsole will only work if the netmask on the interface connected to the robot is set to 255.0.0.0
P.S. A little late I see...
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 23-06-2011 at 15:47.
|