|
I dont rember what we did in 2000, in 2001 we took a piece of think lexan and bolted it to 1 piece of bosch extrusion so it had a nice angle to it, then velcroed everything down. It slipped in the Hp Station so we double taped some leftover belting to the extrusion so it wouldnt slip anymore. Last year we took a piece of plywood, gave it a nice paint job, wrapped the edges with our black and white tape and velcroed everthing down again. Then we decided it needed somthign to help it to be more carryable, so we went to home depot, spent 3 bux on some cabinet handles and put one on each end. A few times thoes had ropes attached to them for following the robot with the tether. I liked the way it worked this year simple and effective...Big suprise.
|