20-07-2011, 21:43
|
 |
systems engineer (retired)
no team
|
|
Join Date: Nov 2009
Rookie Year: 1969
Location: US
Posts: 8,077
|
|
|
Re: PWM Pulse Help
Quote:
Originally Posted by bearsomg
I'm trying to design a computer program that will use the digital outputs of a computer's parallel port to control a jaguar through PWM. From what I know already, one pin goes to ground, but what are the other two pins on the PWM cable used for?
|
http://www.chiefdelphi.com/forums/at...d=13112133 46
Quote:
Originally Posted by bearsomg
how would I calculate the pulse on/off time to sending high/low values through the PWM pulse pin to set the Jaguar to certain speeds (I.e. what would I need to send through the 3 pins to get the equivalent of half speed on the jaguar output)?
|
http://www.chiefdelphi.com/forums/at...4&d=1291927655
Last edited by Ether : 20-07-2011 at 21:56.
|