Thread: Using the school's Network as the Bridge
View Single Post
  #7   Spotlight this post!  
Unread 01-11-2011, 17:08
DavisC DavisC is offline
Registered User
FRC #0539 (Titans)
Team Role: College Student
  
Join Date: Jul 2011
Rookie Year: 2010
Location: Virginia
Posts: 200
DavisC is just really niceDavisC is just really niceDavisC is just really niceDavisC is just really nice
Re: Using the school's Network as the Bridge
Well I made a new attemp yet again today, and I used the components that come with FIRST so y'all can test it yourself if ya want (used: DAP-1522, WRT610N, and all the other normal robot components).

-First I reset the DAP-1522 (pressed and held "reset" button) and followed the FRC manual for configuring it (IP, SSID, etc).
-Then I reset the WRT610N (held "reset" button) and left the IP as the default (192.168.1.1, I believe) and changed the SSID to 539.
-So I connected my Laptop (IP of 10.5.39.6) to the WRT via cable, and the WRT was connected to the DAP via cable, and the DAP was connected to the cRIO via cable.
-----From that, I recieved communication to the cRIO in the Driver Station.
-So I disconnected the cable going from the WRT to the DAP.
-----I was not able to recieve communication by doing that.

So, any suggestions?
Reply With Quote