What is your final goal? If all you want to do is link the robot and a wireless-capable laptop running the Driver Station program, there is no reason to use the router. Just configure the D-Link DAP in Access Point mode as described in the instructions, and connect the laptop to it like you would to any other wireless network.
Quote:
Originally Posted by kinganu123
It may help to set your dlink to the static ip of 10.xx.yy.2 before hand.
|
No, 10.te.am.2 is for the cRIO. The D-Link gets IP address 10.te.am.
1 (with 10.te.am.4 as the default gateway, though usually there won't actually be anything at that address).