|
Re: a ridiculous reset button
- Switch plugged into the wrong Digital Input - test by jumping the signal to ground (bypassing power) & watching in code
- Switch broken - test with a multi-meter
- Switch wire broken - test at the far end from the switch with multi-meter
- Wrong wires/connections used - visually inspect, two outside Digital Input pins ONLY (Sig & -), no center pin (NOT pwr)
- Code using duplicate Digital Input - test with a different Digital Input
- Digital Sidecar not powered correctly - check for three brightly glowing power indicators
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 08-11-2011 at 07:36.
|