|
Re: [FTC]: DC Motor encoder connector broke
Quote:
Originally Posted by VashonRobotics
We had a connector's wires break off and looks difficult to fix, unless we carve away the connector at the sensor side and directly solder wires on.
|
You can buy just the cables for the Encoders
http://parts.ftcrobots.com/store/det...s=32&ID =6364
2 for $24
__________________
Phil Malone
Garrett Engineering And Robotics Society (GEARS) founder.
http://www.GEARSinc.org
FRC1629 Mentor, FTC2818 Coach, FTC4240 Mentor, FLL NeXTGEN Mentor
|