Thread: Gearing for 20 FPS?
View Single Post
  #1   Spotlight this post!  
Unread 29-11-2011, 23:56
HammadB's Avatar
HammadB HammadB is offline
Registered User
FRC #0295 (Renevatio)
Team Role: Mentor
  
Join Date: Jan 2011
Rookie Year: 2007
Location: Granite Bay, CA
Posts: 44
HammadB will become famous soon enough
Re: Gearing for 20 FPS?
Quote:
How I reached it AndyMark Shifters (standard gearing) with two CIMs per side, fed through a 12:22 sprocket reduction to an 8" FIRST wheel gives a top-gear speed of 19.64 FPS after accounting for losses--close enough. With a total weight (including battery and bumpers) of 100 pounds on the driven wheels, you'd be facing a worst-case drivetrain current of 148 amps...but once you got in motion, you'd likely dip back below the all-important 120A of the breaker before it tripped. If you wanted to be super-paranoid--nothing wrong with that--then keep the weight on the driven wheels at 80 pounds or below.
I'm no physics buff, and could be wrong, but wouldn't this have a pretty slow acceleration?
Last edited by HammadB : 29-11-2011 at 23:59.