Thread: pic: Team 3647 West Coast Drive
View Single Post
  #5   Spotlight this post!  
Unread 13-12-2011, 11:58
Mk.32's Avatar
Mk.32 Mk.32 is offline
Registered User
AKA: Mark
FRC #2485 (W.A.R. Lords)
Team Role: Engineer
  
Join Date: Jan 2011
Rookie Year: 2011
Location: San Diego
Posts: 770
Mk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud ofMk.32 has much to be proud of
Re: pic: Team 3647 West Coast Drive
Thanks for the feedback!

Slight updated version, bigger standoffs and nutted/bolted.



The gussets currently are 3/16, so 1/8th would hold up just as well?
And replacing the bottom gussets with a poly carb bell pan sounds like a good idea.
I am thinking of using this: http://www.andymark.com/product-p/am-0836.htm

Also I am debating between using eClips or threaded ends on the shafts to hold the wheels in place, would you would guys recommend?
__________________
Engineering mentor: Team 2485: WARLords 2013-

Team President: Team 3647 2010-2013
Last edited by Mk.32 : 13-12-2011 at 12:02.
Reply With Quote