View Single Post
  #2   Spotlight this post!  
Unread 15-12-2011, 19:01
CNettles11's Avatar
CNettles11 CNettles11 is offline
Registered User
AKA: Chris Nettles
FRC #3502 (Octo-Pi-Rates)
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2011
Location: Tallahassee, FL
Posts: 122
CNettles11 is a jewel in the roughCNettles11 is a jewel in the roughCNettles11 is a jewel in the roughCNettles11 is a jewel in the rough
Re: pic: Wide base robot CAD

Quote:
Originally Posted by Ninja_Bait View Post
First of all, the design has 4 inch wheels, so take advantage of it and give yourself some stability. Don't design a drivetrain for 8 inch wheels if you're using 4 inch wheels.

Also, even the 8 inch wheels could probably move outwards at least an inch.

On another note, make sure you don't block the fans on those Victors. I've never seen one catch fire, but I'm sure if they're too close there's a good chance of it happening.

Last thing: Is the frame 1/16" aluminum and do you plan to weld or use bolts and brackets?
That's true, I'll probably re-design it for more stability if there are ever plans to actually build this robot. The controls design needs more work and if it ever comes to life, I'll definitely have the victors spaced out. The frame is 1/8" aluminum and would be welded if the design ever takes off.
__________________

Reply With Quote