View Single Post
  #20   Spotlight this post!  
Unread 24-12-2011, 00:08
h3x h3x is offline
Registered User
no team
 
Join Date: Oct 2011
Location: United States
Posts: 19
h3x is an unknown quantity at this point
Re: [FTC]: Picking up balls

Quote:
Originally Posted by kz2zx View Post
We used 2-1/2" PVC pipe with a chain and paddle system to elevate balls and make them turn a 90' elbow at the top. We used a second similar system to index/advance non-magnet balls after we sorted them, to move them to our crate-feeding mechanism.

1 servo for each. Not inexpensive, because the sprockets are either expensive to buy from Tetrix, or expensive to mill (very high failure rate in production), and requires a lot of robot structure to take up slack in chain. Also, engineering the mounting system for the paddles to the chain is a pain and requires grinding sprockets, plus cutting relief holes for the paddles in the pipe. Took us a while, and I think we'll go for open transport systems next year if one's involved.
Nice, but obviously very complicated.

I keep thinking there has to be a simpler way to elevate balls, but I'm not sure if there actually is one.
Reply With Quote