Quote:
Originally Posted by Biolore
The power distributor is only outputting 12V from the 24V spot.
|
That sounds like a problem with the Power Distribution Board, and is unrelated to the cRIO. The 8-slot cRIO will not function with only 12 volts supplied to the power input.
Quote:
|
We hooked up the cRIO to a separate source, and that didn't work either.
|
What was the "separate source"? The first-generation FRC-cRIO wants at least 19 volts before it will power up.
(The newer 4-slot FRC-cRIO-II can work with as little as 9 volts.)