|
Re: Victor 883 problem, please help.
Quote:
Originally Posted by Al Skierkiewicz
DB,
If you are using a multimeter to measure end to end continuity, you should not have 1950 ohms on any wire. There should be continuity from end to end on all three wires and no reading from any wire to any other wire. This test is performed with the cable disconnected at both ends.
|
Al is this the case if he is using the PWM Signal Driver? I can't find a data sheet for it but there is some kind of circuitry inline which would explain the lack of continuity he is seeing.
__________________
I'm Back
5279 (2015-Present)
3594 (2011)
3280 (2010)
1665 (2009)
1350 (2008-2009)
1493 (2007-2008)
1568 (2005-2007)
|