Thread: CADing Gears
View Single Post
  #4   Spotlight this post!  
Unread 05-01-2012, 16:24
Frenchie461's Avatar
Frenchie461 Frenchie461 is offline
iScout
AKA: Brian, Frenchie, or that guy
FRC #0461 (Westside Boiler Invasion)
Team Role: CAD
  
Join Date: Jan 2011
Rookie Year: 2010
Location: West Lafayette, IN
Posts: 224
Frenchie461 is a jewel in the roughFrenchie461 is a jewel in the roughFrenchie461 is a jewel in the roughFrenchie461 is a jewel in the rough
Re: CADing Gears
If you aren't planning on rendering the gear for any reason, just use a cylinder (i.e a 20 tooth 20 dp gear .4 inches thick becomes a 1 inch diameter by .4 inch high cylinder).

If you are planning on rendering then download the models from here
__________________
"As a general rule, the most successful man in life is the man who has the best information." - Benjamin Disraeli (1804-81)
Reply With Quote