Thread: Bumper height zone?
View Single Post
  #2   Spotlight this post!  
Unread 08-01-2012, 16:00
Mike Norton's Avatar
Mike Norton Mike Norton is offline
Registered User
FRC #0061
Team Role: Teacher
  
Join Date: Oct 2001
Rookie Year: 1995
Location: Upton, MA
Posts: 476
Mike Norton is a name known to allMike Norton is a name known to allMike Norton is a name known to allMike Norton is a name known to allMike Norton is a name known to allMike Norton is a name known to all
Re: Bumper height zone?
Quote:
The Robot must have a Frame Perimeter that is comprised of fixed, non-articulated structural elements of the Robot. The Frame Perimeter of a Robot is defined by the outer-most set of exterior verticies on the Robot that are within the Bumper Zone, which is between 2 and 10 in. from the floor. Minor protrusions no greater than ¼ in. such as bolt heads, fastener ends, and rivets are not considered part of the Frame Perimeter.

I hope this helps
__________________
Building FIRST robots since 1995
BVT Robotics