Thread: Field Drawing Question
View Single Post
  #2   Spotlight this post!  
Unread 08-01-2012, 21:58
Retired Starman Retired Starman is offline
Registered User
FRC #3573 (Ohms)
Team Role: Mentor
  
Join Date: Jan 2009
Rookie Year: 2003
Location: Stone Mountain, GA
Posts: 165
Retired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant futureRetired Starman has a brilliant future
Re: Field Drawing Question
There is a slight difference between the specifications for the Team-Built bridge and the Official Bridge. The Team-Built bridge top is 88 by 48 in. while the Official Bridge top is 88 by 47 in. The Official Bridge has an aluminum side barrier that takes it up closer to 48 in. wide, but the surface is only 47 in. wide.

Both bridges use the same surface of a sheet of 1/8 in. thick polycarbonate which is 88 by 47 in. This is found on Drawing GE-12095 in the official field drawing set available on the usfirst.org web site.

Dr. Bob
Reply With Quote