Quote:
Originally Posted by Alan Anderson
You don't have to switch users. You can run the Driver Station as a Developer.
|
Do I just follow the instructions on installing the Driver Station again on the Developer account?
Quote:
Originally Posted by Alan Anderson
First, is the big amber Robot Signal Light plugged into the Digital Sidecar? If not, you can still look at the little green LED next to the RSL connector. What is the light doing when the robot is disabled? What is it doing when you enable the robot?.
|
I am not sure which green LED this is, do you have a picture of it? Also we have not installed the Robot Signal Light yet.
Quote:
Originally Posted by Alan Anderson
Second, is the Digital Sidecar properly powered? Are the BATT, +5v, and +6v green LEDs all brightly lit?
|
They are brightly lit, all the time while the robot is powered.
Quote:
Originally Posted by Alan Anderson
Third, is the cable from the cRIO's digital module to the Digital Sidecar assembled correctly? Some of the ones supplied in the Kit of Parts have one of the connectors backwards. See here for details. |
Our cable seems to be fine(no twist).
We also get an error message on the Driver Station. Something about error -44061 "left and right motor" loop is taking too long.
I've heard good things about the
http://www.frcmastery.com/ videos.[/quote]