The bumper zone (2-10" off the floor this year) typically is the zone that the bumpers have to be contained within - the top of the bumper can be no more than 10" from the floor, and the bottom no less than 2" from the floor.
Al - wouldn't a team with that design violate R35? I doubt anyone would consider those interior bumpers to be "approximately" 90 degrees from the other 3 sides of the robot!
Quote:
[R35]
Teams shall display their team number on the Bumpers in four locations at approximately 90° intervals around the perimeter of the Robot. The numerals must be at least 4 in. high, at least 3⁄4 in. in stroke width, and be either white in color or outlined in white. Team numbers must be clearly visible from a distance of not less than 100 ft, so that judges, referees, and announcers can easily identify competing Robots.
|