|
There is a LabVIEW version for Linux and Mac but they are not on the cd included in the kop. they can be requested from ni, but the frc stuff wouldn't work anyways. I think that the frc driver station uses windows only functions. The wpi stuff could theoretically be copied from a windows machine, but the crio toolkit would have to be installed separately, and the FRC additions wouldn't work either.
if you can get it all setup, you may still require help just connecting with the robot and deploying. I would recommend getting a windows machine for the FRC programming.
(Again it is possible to program the cRIO using Linux, but I an not sure at how easy or successful you would be)
__________________
Mike B
|