Quote:
Originally Posted by AndrewWinslow
The issue I'm seeing here is the size of the robots. When you have a large piece of machinery with 120 pound max (and I just KNOW we're going to have a lot of robots approach that limit) that is 28"x38", the balancing problem increases.
Simple communication with the team across the field will be difficult, but the largest problem is how would you pull down the bridge? You can't push down with the greater-than-120 pound force needed to push the other robot up, because your own bot would lift off the ground from the force of the mechanism. So unless you can coordinate driving, simply getting two bots on there won't happen.
|
One robot is already on the bridge waiting for another robot to approach, when they see the robot coming they drive to that side of the bridge thus lowering that side to allow that team to drive up onto the bridge then both robots drive towards the other side of the bridge to balance it out..
Problem solved...