Thread: BlackJaguar-99.bin issues
View Single Post
  #30   Spotlight this post!  
Unread 12-01-2012, 23:02
kccowan kccowan is offline
Registered User
AKA: Ken Cowan
FRC #1073
Team Role: Mentor
  
Join Date: Feb 2011
Rookie Year: 2010
Location: Hollis, NH
Posts: 17
kccowan is an unknown quantity at this point
Re: BlackJaguar-99.bin issues
Mike and Joe,

I think one of you has a problem. We tested the V93 firmware just prior to RiverRage and ran into a problem of not being able to flash the new firmware. I had the same issues with the V100 firmware. *None* of my Jags could be flashed. The 2CAN reported a timeout error for each.

We tried having a CAN bus with just 1 gray/tan Jag. Tried switching terminator resistors. None of that helped.

However, we easily re-flashed the V92 firmware. Fortunately, I found the post that said it was in Public Documents\FRC on my computer. It's not searchable on the TI website.

Any suggestions on what to try next? Would using the BDC-COMM app over a USB to serial connection help? Might we need an upgrade to the 2CAN firmware?

KC
Software Mentor, Team 1073
Reply With Quote