Quote:
Originally Posted by cesaros
Another Issue we are having is Getting camera images, we use the camera connected to cRIO port2 , its IP is set to : 192.168.0.90, we have already created the two default users(FRC/FRC and root/admin) but when we declare
AxisCamera::GetInstance("192.168.0.90") ,nothing happens to official dashboard.
|
The default dashboard is set up to expect the camera at 10.xx.yy.11. To use the camera in the configuration you have it, you will have to install LabVIEW, create a dashboard project, change the camera IP, build the Dashboard and use your new Dashboard.A possibly easier option would be to set up the camera to plug into the robot radio as described on Page 27 of Getting Started with the 2012 FRC Control System.