I ran the Setup Axis Camera tool on our 2011 Axis 206 camera, set the accounts and such, then attempted to run the Camera Performance Example project on the robot, but got this error:
Quote:
Watchdog Expiration: System 3, User 2
ERROR<code> -44003 occured at WPI_CameraIssue HTTP Request with Authentication.vi>>WPI_CameraIssueGet Enum Sensor Property.vi>>WPI_CameraGet Exposure.vi>>WPI_Camera Registry.vi>>WPI_CameraOpen>>Camera Performance Example.vi
<time>16:26:47 01/13/2012
FRC: Operation failed due to a communication failure with the camera.
|
What could be causing this?