[ehlochbr]

I've been having problems with the camera and thought I had fixed it tonight, but I'm not quite there and could use advice.

I used the 2012 setup program for the camera and set it up so that the camera gets plugged into the radio instead of the cRIO. After doing this it looks like it works (I can see an image on the dashboard). But when I do a hard reset on the robot the camera goes away and never comes back. In order to get an image again on the dashboard I have to go through the whole setup process again with the setup program.

If I use the setup program to set up the camera so that it plugs into the cRIO, it never works.

Any ideas? Thanks.