Try starting from scratch, it looks like you've chewed up the default code a bit.
- Rerun the camera setup utility to get the settings right and verify the settings by successfully browsing to the camera at 10.xx.yy.11
- Make sure you have a green ring before expecting any picture
- Connect the camera to the DLink, not the cRIO
- Create a new default robot project, and don't make any changes to it.
- Download the project of course.
- Fireup the default Dashboard
- Verify your Classmate IP address and netmask
The default code and settings expect the camera to be connected via the robot DLink with an IP address of 10.15.29.11