|
Camera won't work
We have tried to configure the axis M1011 camera using the Camera Configuration Tool in order to use the camera when it is connected to port 2 on the 8-Slot FRC cRIO. We connected the camera directly to the computer, changed the computer's static IP as required, chose the option that says "port 2 on the 8-Slot FRC cRIO" on the Camera Configuration Tool, and clicked "apply".
We got a success message, but when we connect the camera to the cRIO on port 2, we don't recieve any image (we get a blank screen on the dashboard).
Can anyone help us, please?
p.s: When we tried to select the other option on the camera configuration tool, we recieved an image, but only when the cammera was connected directly to the commputer.
|