Quote:
Originally Posted by Mr. Lim
Camera should not be connected to cRIO port 2.
Connect it directly to your router instead.
You should be able to ping it from your driverstation using ping 10.xx.yy.11
|
It will need to be connected to the cRIO to use tracking code on the robot. And it worked last year connected through the cRIO, as well as there being an option in the Axis camera utility specifically for connected through the cRIO.
Also, we have had the same error when connected through the router, however I haven't tested this as extensively.
If you have advice on using the router (should it start working on router only) for vision tracking, preferably without the involvement of LabView, I would still be grateful for that as well.