Quote:
Originally Posted by Team 3705
Is there a wiring diagram of the gryo/accelerometer to the digital sidecar? Because the data sheets was not very helpful...
|
The wiring diagrams indicate what pins correspond to what. If you actually take a look at the DS, you'll notice that the 3 pins are labeled signal, 5V, and GND - which correspond to rate, PWR, and GND (or whatever the labels are) on the gyro and accelerometer.
CRL, have you made sure your DB37 is properly setup as per FIRST's directions? If that's not the problem, then you may want to go through your code and ensure data is being parsed properly (I know Java has had issues with this, I don't know about LabVIEW).