|
Re: Need help with the Axis 206 Camera
Have you run the Axis Camera Setup Utility that comes with the FRC Tools Installer?
It sets the IP of the camera to 10.xx.yy.11, and also creates a login/pass that is FRC/FRC. Note the all-caps
Once you run it, you can patch the computer directly to the camera, or through the router, and be able to ping the camera, and open a browser to see the camera's web interface.
Once you've successfully done that, connect the camera to the router on the robot, and try again.
From your programming computer, you should then be able to ping both the cRIO and camera.
If you can do that, your Java code should then work.
__________________
In life, what you give, you keep. What you fail to give, you lose forever...
|