Quote:
Originally Posted by Doc543
We had the same error also when we plugged it into the 2nd port on our C-RIO. On the documentation on the Axis Camera code it says I should work if you plug it in that slot, we are using the old bridge connection for our prototype, is there a way to fix that error?
|
Check what year the sample code is from. It is likely not from this year.
In posts mentioned above, I believe support for the camera on port 2 has changed this year. There are also reasons as to why the other approach will likely work better for you.
I strongly recommend you move the camera off port 2, run the camera setup utility, and patch it directly into the router instead.
__________________
In life, what you give, you keep. What you fail to give, you lose forever...