|
Re: What is the IP address for the new CRIO
I'd guess that the the IP defaults to something like 10.0.0.2. If that doesn't work, change your subnet to 255.0.0.0 and test an IP from each of the three IP blocks defined for private use:
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
If you get on the right block, the cRIO Imaging tool should then find it, and you're all set.
...let us know what you come up with.
|