|
Re: CIM 1:1
Quote:
Originally Posted by Ether
Would this work?
Go to your local auto parts place. Buy a piece of tubing that fits snugly over the wheel axle, and a piece that fits snugly over the CIM's output shaft. Buy a male-male adapter to connect the two different sizes of tubing together. Make the tubing as short as possible, and mount the CIM so it is concentric and coaxial with the wheel axle. The wheel must be separately supported.
|
This may work, my team has done something similar to connect shaft encoders.
__________________
Theory is a nice place, I'd like to go there one day, I hear everything works there.
Maturity is knowing you were an idiot, common sense is trying to not be an idiot, wisdom is knowing that you will still be an idiot.
|