Thread: Key-Way for Gates Sprockets
View Single Post
  #13   Spotlight this post!  
Unread 21-01-2012, 09:30
mentorDon's Avatar
mentorDon mentorDon is offline
Registered User
FRC #1764
Team Role: Mentor
  
Join Date: Jan 2007
Rookie Year: 2006
Location: kansas city, mo
Posts: 22
mentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these partsmentorDon is infamous around these parts
Re: Key-Way for Gates Sprockets
If you are going to use an arbor press make sure the press is large enough so that the broach/sprocket length distance will fit into the press. A 3 ton Grizzly arbor press has a working height of 11 1/8 inches. While a 1 ton only has a working height of 5 inches. It really doesn't take a lot of force to broach a small keyway slot but the equipment must be able to open up enough for your work piece to fit.