Thread: Trouble With Flashing the cRIO with 2012 software
View Single Post
  #2   Spotlight this post!  
Unread 21-01-2012, 17:43
sometimestommy's Avatar
sometimestommy sometimestommy is offline
Schrödinger's Assistant
AKA: Thomas Moll
FRC #1939 (Ku-Nig-Its)
Team Role: Programmer
  
Join Date: Jan 2011
Rookie Year: 2009
Location: US
Posts: 48
sometimestommy is on a distinguished road
Re: Trouble With Flashing the cRIO with 2012 software
Hey, our team had the same problem but fixed it by going to the kit of parts site on the first website.

Scroll down close to the bottom and look for the NI utilities update
this should get you the new set of Imaging tools needed for this year.

As far as the image. Just run the setup from the image file again to re install it.

Now find the 2012 frc cRIO imaging tool and your image should appear along with a picture of a 4-slot cRIO that shows your installed modules.
Now just simply set your teams IP address (instructions are in the program) and click the image you installed.

This should work, if not just either PM me and i can help you further.

-Thomas