Quote:
Originally Posted by RufflesRidge
If you have it in slot 4 you can get things working by using Digital Module 2 in LabVIEW, but per the rules you must have a Digital Module in Slot 2 of the cRIO so you might as well move it now.
|
Just mioved it and the same problem, however we were seeing the PWM outputs both times and nothing was happening so we replaced the non moving jaguar and nothing is working again. Both sides are jaguars by the way.
Tried putting from PWM 1 and 2 to PWM 1 and 3 for both motors. PWM 1 is the working one