|
Re: Running the Camera through cRIO port 2
The camera normally (in 2012) plugs into the robot bridge/ap DLink, not the cRIO port 2.
With an IP address of 10.xx.yy.11 and an Administrator user account/password of FRC / FRC
Both the Dashboard and the cRIO are setup to request images that way by default.
The default code is setup for this. You just need to change back to "True"
To have the cRIO request images then echo them to the Dashboard you will have to add cRIO code that forwards the images.
__________________
"Rationality is our distinguishing characteristic - it's what sets us apart from the beasts." - Aristotle
Last edited by Mark McLeod : 22-01-2012 at 15:42.
|