|
Re: p60 Gearbox not working with motor.
Quote:
Originally Posted by JamesCH95
Likely that the bolts that connect the motor to the transmission are too long. Try cutting them down or buying shorter bolts.
|
If the motor spins freely when mounted to the plate, it's not the mounting bolts.
I have a feeling that the 550 shaft might be a little long or that the gear might not be pressed onto the 550 far enough. I know we have run into problems like this in the past.
__________________
"Engineering is making the impossible happen"
"We are here to create, not merely survive" - unknown fortune cookie 
"If you don't push the envelope you're just spinning your wheels"
|